Author Topic: A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291  (Read 191 times)

0 Members and 1 Guest are viewing this topic.

Offline KiwiZac

  • The Zac Attack is Back!
  • Needs A Life Outside What-If
  • *****
  • Posts: 2114
  • aka K5054NZ, proud Whiffer since 2005
    • Zac on Facebook
A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291
« on: November 26, 2019, 10:18:23 pm »
WA119 was one of a handful of Curtiss-Fairey Kittiwakes exported to the United States, sold at the June 1960 auction to Las Vegas doctor Bert Reilly. After reassembly in Florida it was first flown on November 12 as NX6291 and later ferried to Las Vegas. The aircraft was sporadically flown by Reilly for business commuting and recreation but after setting a point-to-point speed record between Las Vegas and Chicago, Reilly decided to modify the aircraft for air racing.

Academy 1/72 P-40M/N as Curtiss-Fairey Kittiwake WA119/NX6291 by Zac Yates, on Flickr

The airframe was fitted with a more streamlined canopy, a specially tuned engine driving a new propeller with three broad-chord blades, and clipped wings with aerodynamic endplates. NX6291s first flight in racer configuration was on June 13 1964. Reilly campaigned the unpainted aircraft at the first Reno Air Races in September 1964 as Race 91 and placed fifth. The following June Reilly competed at Los Angeles but was less successful, placing tenth. Three months later the pair were back at Reno but did not finish due to engine issues, having to withdraw during the heats.

Academy 1/72 P-40M/N as Curtiss-Fairey Kittiwake WA119/NX6291 by Zac Yates, on Flickr

During the off season the aircraft was finally painted, receiving an overall blue scheme with yellow spinner, wing stripes and race number on the tail and wings. The run of bad luck continued as while en route to the 1966 Los Angeles races Reilly took ill in mid-air had to land at Barstow, missing the event while he was hospitalised for a week with a stomach ailment.

Academy 1/72 P-40M/N as Curtiss-Fairey Kittiwake WA119/NX6291 by Zac Yates, on Flickr

Interviewed by a local newspaper ahead of the Reno races that September Reilly was optimistic about his chances as he had been regularly flying Race 91 and tuning the Griffon for optimum performance. Tragically his dreams of victory were not to be. During practice on September 23 one of the propeller blades sheared off, sending the aircraft out of control into the desert floor near one of the race pylons. Reilly, aged 47, was killed on impact and the aircraft destroyed.

Academy 1/72 P-40M/N as Curtiss-Fairey Kittiwake WA119/NX6291 by Zac Yates, on Flickr

***
When I created the Kittiwake story the Reno racer was just a fun little throwaway based on the books of the races from the local library. Not many P-40s have raced over the years and, from memory, none of them were modified in the style of the P-51s etc (one did get a streamlined canopy inspiration for this! but I believe it never raced) so I figured a Griffon-powered variant would be ideal.

The kit was the Academy P-40M/N (my standard base for Kittiwakes) with an Academy Ju-87G prop and spinner, Revell P-47D canopy and exhausts and pilot from my spares box. The wing endplates are simple rectangles of clear styrene and the decals are from various sources including most conveniently the slightly rearranged registration from a Minicraft 1/48 Bonanza. One day I may add the gear doors (lost over several house moves) but dont count on it ;).

I started this build about three years ago but stalled for reasons I dont recall, and have had a very enjoyable time in recent days expanding on both airframe and story as well as the build itself. I hope you like it!
With warm regards from Whanganui, New Zealand

Zac Yates

Offline Tophe

  • Needs A Life Outside What-If
  • *****
  • Posts: 16045
    • my what-if models
Re: A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291
« Reply #1 on: November 27, 2019, 01:09:54 am »
Wow! :thumbsup: :wub: :bow:
[the word "realistic" hurts my heart...]

Offline zenrat

  • Needs A Life Outside What-If
  • *****
  • Posts: 16367
  • Currently on double secret probation.
Re: A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291
« Reply #2 on: November 27, 2019, 02:15:24 am »
 :thumbsup:
Fred

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

Offline PR19_Kit

  • Closeted Take That fan
  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 31158
  • Whiffing since the 70s
Re: A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291
« Reply #3 on: November 27, 2019, 03:41:01 am »
I LOVE the look of that Zac!  :wub:

The use of the P-47D canopy in reverse is inspired!  :thumbsup:
Any aircraft can be improved by fitting longer wings, and/or a longer fuselage

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

Offline NARSES2

  • Nick was always on his mind - just ask the Pet Shop Boys
  • Global Moderator
  • Needs A Life Outside What-If
  • *****
  • Posts: 38818
Re: A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291
« Reply #4 on: November 27, 2019, 06:06:35 am »

The use of the P-47D canopy in reverse is inspired!  :thumbsup:

It truly is  :thumbsup: :thumbsup:
Decals my @r$e!

Offline Dizzyfugu

  • Needs A Life Outside What-If
  • *****
  • Posts: 9506
    • Lots of works in my FlickR gallery
Re: A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291
« Reply #5 on: November 27, 2019, 07:48:43 am »
Very cool.  :thumbsup:

I once used a reversed P-51 hood as a windscreen on a He 100 racer.

Online TheChronicOne

  • Needs A Life Outside What-If
  • *****
  • Posts: 8124
  • -Sprues McDuck-
Re: A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291
« Reply #6 on: November 27, 2019, 09:38:33 am »
Pretty cool hoss!
-Sprues McDuck-

Offline Captain Canada

  • "but this time it's different. I was drunk when I agreed to it."
  • Needs A Life Outside What-If
  • *****
  • Posts: 29152
Re: A Griffon'd P-40 goes to the races! 1/72 Kittiwake racer NX6291
« Reply #7 on: November 27, 2019, 09:49:29 am »
Who doesn't like a story with a happy ending !  ;)

Great little read and even better model. Looks great like that, and an idea I'd like to remember as she looks fun to fly about the room. Cheers !
CANADA KICKS arse !!!!

Long Live the Commonwealth !!!
Vive les Canadiens !
Where's my beer ?