avatar_chrisonord

More new paint to try

Started by chrisonord, February 12, 2026, 10:58:33 AM

Previous topic - Next topic

chrisonord

Today while in the Range, I happened across a display with a few of these paints on. Looks like there is quite a selection going off the display. All Water based permanent Acrylic. They are a quid each, so bought 7 bottles. The amount in them they should last a while.
The dogs philosophy on life.
If you cant eat it hump it or fight it,
Pee on it and walk away!!

PR19_Kit

Ooooh, they look interesting Chris. I'll look out a local Range in these parts.

I've still got that RF-84F for you, and I think I've now found a box to post it in too.
Kit's Rule 1 ) Any aircraft can be improved by fitting longer wings, and/or a longer fuselage
Kit's Rule 2) The backstory can always be changed to suit the model

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

chrisonord

Quote from: PR19_Kit on February 12, 2026, 11:13:36 AMOoooh, they look interesting Chris. I'll look out a local Range in these parts.

I've still got that RF-84F for you, and I think I've now found a box to post it in too.
Cheers kit whenever you are ready. I have yet to try these out, I bought colours I would probably use over large areas, so I might dig out a spare wing or something and see how they fair.
The dogs philosophy on life.
If you cant eat it hump it or fight it,
Pee on it and walk away!!

jcf

They're generally referred to as craft paints, they work well for some uses, figures
in particular, but in my experience you'll definitely want to use them over a primer
as some don't like to adhere to bare plastic. They tend to be heavy-bodied, which
is fine in some uses, but you'll want to thin them for general use, however they
are sensitive to being over-thinned and can go from paint to stain in a flash, which
is fine if you're using wood. Also, in my experience, airbrushing is out.
;D

Get a cheap plastic artist's pallete, the type with a bunch of dimples, and just squeeze
a bit of the paint into one of the cups and use that to work from. A small dropper bottle,
like a Vallejo etc. paint bottle, full of water is the best way to control thinning the paint
as you work with it.


chrisonord

I tried some of the red I bought last night on a piece of scrap styrene sheet. No prep, just painted it straight on. It dries with a matt finish and as expected, will need another coat, but it goes on pretty good, so worth the investment.
The dogs philosophy on life.
If you cant eat it hump it or fight it,
Pee on it and walk away!!