What if

Picture Post => Current and Finished Projects => Sci-fi => Topic started by: nönöbär on December 22, 2019, 02:14:49 AM

Title: Perry Rhodan - Mosquito-Jet, December 2405
Post by: nönöbär on December 22, 2019, 02:14:49 AM
Perry Rhodan - Mosquito-Jet, December 2405


The vehicle:

The Mosquito-Jet was a huge milestone in the development of Terranian space fighters as it was the first vehicle of its kind with a FTL drive. Equipped with a Transform-Gun carrying three 20GT nuclear bombs and a so called "HÜ" force field, it was a huge improvement compared with older space fighters.
With a length of 26 meters and a crew of two, the Mosquito was significant bigger than previous fighters. The FTL drive had a range of approximate 100.000 light years and the jet was able to accelerate wiht 700km/s^2.

Soon the Mosquito-Jet got the backbone of Terranian space fighters and it was found on almost every base or in major space craft.

More info about this craft can be found in the Perrypedia (German) https://www.perrypedia.de/wiki/Moskito-Jet  (https://www.perrypedia.de/wiki/Moskito-Jet)and in the cut-away  drawing  https://www.pr-materiequelle.de/riss/risszeichnung/r313.htm (https://www.pr-materiequelle.de/riss/risszeichnung/r313.htm)
 
The model shows a Mosquito-Jet and some older single seat fighters in a hangar on the planet Opposite in December 2405.

(https://www.german-navy.de/web/ScaleModels/ScaleModel20191222115006.jpg)
(https://www.german-navy.de/web/ScaleModels/ScaleModel20191222115007.jpg)
(https://www.german-navy.de/web/ScaleModels/ScaleModel20191222115008.jpg)
(https://www.german-navy.de/web/ScaleModels/ScaleModel20191222115109.jpg)
(https://www.german-navy.de/web/ScaleModels/ScaleModel20191222115110.jpg)


The model:

This is a 3D printed model in 1/250 scale. The 3D model was created by Heinz Schöck, some parts in the Hangar (missiles, tanks) are made designed by him as well. The Mosquito was printed with an Anycubic Photon SLA printer and painted with Revel Aqua Color. Decals are from the spare part box.
The Hangar was designed by me using Tinkercad and Printed on an Anycubic Mega FDM printer. It was airbrushed with Revel Aqua Color.
Title: Re: Perry Rhodan Mosquito-Jet, December 2405
Post by: zenrat on December 22, 2019, 02:27:55 AM
 :thumbsup:
Title: Re: Perry Rhodan Mosquito-Jet, December 2405
Post by: PR19_Kit on December 22, 2019, 03:07:55 AM
This 3D printed stuff puts you in a class of one! I brings so many things that were previously impossible into the realms of the possible.  :thumbsup:
Title: Re: Perry Rhodan Mosquito-Jet, December 2405
Post by: NARSES2 on December 22, 2019, 05:53:40 AM
Quote from: PR19_Kit on December 22, 2019, 03:07:55 AM
This 3D printed stuff puts you in a class of one! I brings so many things that were previously impossible into the realms of the possible.  :thumbsup:

It certainly does  :thumbsup: :thumbsup:
Title: Re: Perry Rhodan - Mosquito-Jet, December 2405
Post by: Captain Canada on December 28, 2019, 06:08:06 AM
Very cool. That's a neat little dio and for sure, the 3D thing is pretty wild ! Someday maybe !

Title: Re: Perry Rhodan - Mosquito-Jet, December 2405
Post by: The Rat on December 28, 2019, 11:13:35 AM
Loving this theme!
Title: Re: Perry Rhodan - Mosquito-Jet, December 2405
Post by: The Chaos on December 29, 2019, 07:03:43 AM
Great Job i have the Blues Chip and The Glador in my stash.
Title: Re: Perry Rhodan - Mosquito-Jet, December 2405
Post by: nönöbär on December 29, 2019, 07:48:28 AM
Quote from: The Chaos on December 29, 2019, 07:03:43 AM
Great Job i have the Blues Chip and The Glador in my stash.

The Revell kits? I have the SOL kit here and had build the Marco Polo in the past, but this was a quite bad kit to build.