avatar_NARSES2

Essential, useful or luxury ?

Started by NARSES2, November 08, 2020, 07:14:27 AM

Previous topic - Next topic

NARSES2

When I first saw this in Airfix Model World I poo-poo'd it, but upon reflection I don't know.

Given the recommended "shake" time is 20/30 seconds I suppose you could be shaking one bottle whilst using another, especially when detail painting in cockpits etc. Would save me trying to hold 5 bottles in one hand whilst shaking vigorously and counting to 100  :rolleyes:

This is the type of purchase I could make at Telford, especially if there's an attractive female behind the stand  :angel:

https://www.timodel.co.uk/

Decals my @r$e!

Steel Penguin

handy, BUT  ive heard of several wargamers who ended up covered when lids came off, or when the mixing ball inside the dropper bottler chewed its way out   :banghead:
Redone 19/08/15  the things you learn, give your mind the wings to fly, and the chains to hold yourself steady added 07/10/18   take off and nuke the site form orbit, nope, time for the real thing, CAM and gridfire, call special circumstances.   wow, its like freefalling into the Geofront

chrisonord

Sort of takes the fun out of it really  doesn't it.  Especially when you have carpal tunnel syndrome, and you  have to put it down and not use it for a  while after  :rolleyes: ;D ;D
Chris
The dogs philosophy on life.
If you cant eat it hump it or fight it,
Pee on it and walk away!!

TomZ

Reality is an illusion caused by an alcohol deficiency

Leading Observer

Quote from: NARSES2 on November 08, 2020, 07:14:27 AM
When I first saw this in Airfix Model World I poo-poo'd it, but upon reflection I don't know.

Given the recommended "shake" time is 20/30 seconds I suppose you could be shaking one bottle whilst using another, especially when detail painting in cockpits etc. Would save me trying to hold 5 bottles in one hand whilst shaking vigorously and counting to 100  :rolleyes:

This is the type of purchase I could make at Telford, especially if there's an attractive female behind the stand  :angel:

https://www.timodel.co.uk/
Always a risk pooh-poohing https://www.youtube.com/watch?v=QeF1JO7Ki8E
LO


Observation is the most enduring of lifes pleasures

frank2056

I poo-pooed the idea for a while... until some of the paint I was using stopped working properly. I've been using the Badger Stynylrez Primers (acrylics) for a while and they're amazing. I noticed half way through a bottle of black that the paint just wasn't sticking as well as it used to and the pigment wasn't as thick. It turned out that most of the pigment (and probably some of the carrier) had settled and gooed up at the bottom of the bottle.

I bought a cheap nail polish shaker machine and some stainless steel balls from Amazon and added a ball to each bottle. I give them a minute or two worth of shaking in the machine. This is really helpful with some Vallejo and Scale 75 acrylic paints. I haven't had an issue with the paints since.

buzzbomb

Just another gadget to find precious bench space for.
As handy as it looks, would most probably end up in the "Tools that are great but use very seldom drawer" like the Harbour Freight mini Drop saw, the suction vice, the set of 6-15mm punches, the nibbling tool... it goes on :-X



zenrat

Fred

- Can't be bothered to do the proper research and get it right.

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

zenrat industries:  We're everywhere...for your convenience..

Dizzyfugu

Quote from: zenrat on November 09, 2020, 02:11:34 AM
DIY Electric toothbrush based shaker.  https://www.youtube.com/watch?v=V3D2Inna0-k

A friend of mine scratched a handheld mixer for enamel and acrylic paint tins/pots from an electric toothbrush and a "mixer head" attached to the rotating/vibrating head instead of the bristle. Pretty successful (V2.0 is currently in use), even though it is not suited for enamels where the pigments have thoroughly separated from the thinner and form a kind of concrete at the tin's botton.

zenrat

While power assistance is nice I do find poking a stirrer into the tin or pot and moving it in a circulating motion is often quite successful.
Fred

- Can't be bothered to do the proper research and get it right.

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

zenrat industries:  We're everywhere...for your convenience..

PR19_Kit

WAY back in the mid 60s I converted one of my, then superceded, slot race motors (A Revell 500 actually...) into a paint stirrer. I soldered a shortish (4") length of brass tube onto the motor shaft, flattened one end and bent and twisted it like a single bladed propeller. Then I fashioned a switch from an old paper clip so I could turn the motor on and off by pressing the paper clip against one of the motor's brush housings. Voila, a paint stirrer.

I usually run it at around 8 volts, but even then I need a sawn down toilet roll holder, held around the paint tin, to act as a shield or else EVERYthing gets painted, even me!

I still have it and still use it, almost every day.
Any aircraft can be improved by fitting longer wings, and/or a longer fuselage

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

zenrat

I have a number of discarded childs electric toothbrushes.  The cheap ones you put batteries in rather than the expensive rechargeable ones.  I shall be experimenting...
Fred

- Can't be bothered to do the proper research and get it right.

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

zenrat industries:  We're everywhere...for your convenience..

Rheged

Quote from: zenrat on November 10, 2020, 03:35:42 AM
I have a number of discarded childs electric toothbrushes.  The cheap ones you put batteries in rather than the expensive rechargeable ones.  I shall be experimenting...

I suggest that you experiment with a degree of caution.  A paint splattered  Zenrat would not be a good thing, and should any portion of the Zenrat Manor be anointed with paint, I anticipate that a degree of domestic discord might occur.
"If you can keep your head when all about you
Are losing theirs and blaming it on you....."
It  means that you read  the instruction sheet

JayBee

Well, I have in my hands, a paint stirrer from the "Badger Air-brush Company" .
I have suffered no splatter. You just have to remember to NOT switch it on BEFORE you put it into the tin, and switch it OFF, BEFORE you take it out.
No problemo.
Anyway, what is the problem with some splatter?
It is just a hazard of the hobby.
Mind you,, there are armour modellers who would give their lleft arm to perfect the technique for their models.  :rolleyes:
Alle kunst ist umsunst wenn ein engel auf das zundloch brunzt!!

Sic biscuitus disintegratum!

Cats are not real. 
They are just physical manifestations of collisions between enigma & conundrum particles.

Any aircraft can be improved by giving it a SHARKMOUTH!

zenrat

#14
Quote from: Rheged on November 10, 2020, 04:55:21 AM
Quote from: zenrat on November 10, 2020, 03:35:42 AM
I have a number of discarded childs electric toothbrushes.  The cheap ones you put batteries in rather than the expensive rechargeable ones.  I shall be experimenting...

I suggest that you experiment with a degree of caution.  A paint splattered  Zenrat would not be a good thing, and should any portion of the Zenrat Manor be anointed with paint, I anticipate that a degree of domestic discord might occur.

I appreciate your concern.  All experimentation will take place in one of stately zen manor's extensive outbuildings.  I will have to remember though NOT to try it out just before going to work while wearing my official Australia Post uniform shorts.
Fred

- Can't be bothered to do the proper research and get it right.

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

zenrat industries:  We're everywhere...for your convenience..