Author Topic: Gloster CXP-1001 - Done  (Read 1073 times)

0 Members and 1 Guest are viewing this topic.

Offline Caveman

  • Targeted for assassination by JMNs
  • ****
  • Posts: 769
Re: Gloster CXP-1001 - Done
« Reply #30 on: June 18, 2021, 10:59:46 pm »
Amazing! Obviously, thereís improvements that could have been made, but as the first example Iíve seen on a from naught to model printed project, Iím dead impressed!

Thanks itís my first try printing from scratch too. It is basic and the finish is rough necessitated by the timeline. Iím tempted to do a recce version for the next GB and see what improvements I can make. Iíll rebuild the 3D model to incorporate some lessons learned and more detail. With the current surface roughness Iím getting, panel lines are out but Iíll see what can be done.
« Last Edit: June 19, 2021, 12:52:05 am by Caveman »
secretprojects forum migrant

Offline Old Wombat

  • Needs A Life Outside What-If
  • *****
  • Posts: 10498
  • Armour: The Gods of War love it!
Re: Gloster CXP-1001 - Done
« Reply #31 on: June 18, 2021, 11:47:09 pm »
Has a life outside of What-If & wishes it would stop interfering!

"The purpose of all War is Peace" - St. Augustine

veritas ad mortus veritas est

Offline zenrat

  • Needs A Life Outside What-If
  • *****
  • Posts: 21396
  • Currently on double secret probation.
Re: Gloster CXP-1001 - Done
« Reply #32 on: June 19, 2021, 03:40:12 am »
Definitions are only going to get higher and results smoother.
This is the future.  In a few years we'll wonder how we ever did without 3d printers.

Good job.
 :thumbsup:
Fred

- Can't be bothered to do the proper research and get it right.

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

zenrat industries:  We're everywhere...for your convenience..

Offline NARSES2

  • Nick was always on his mind - just ask the Pet Shop Boys
  • Global Moderator
  • Needs A Life Outside What-If
  • *****
  • Posts: 46202
Decals my @r$e!

Offline Caveman

  • Targeted for assassination by JMNs
  • ****
  • Posts: 769
Re: Gloster CXP-1001 - Done
« Reply #34 on: June 19, 2021, 06:44:43 am »
 :wub:

Thanks all. One downside of this is that Iíve finished a model but my stash hasnít got any smallerÖ
secretprojects forum migrant

Offline Mossie

  • Twiglet doctor
  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 14470
  • Don't laugh at his mule
Re: Gloster CXP-1001 - Done
« Reply #35 on: June 19, 2021, 10:31:11 am »
Amazing! Obviously, thereís improvements that could have been made, but as the first example Iíve seen on a from naught to model printed project, Iím dead impressed!

Thanks itís my first try printing from scratch too. It is basic and the finish is rough necessitated by the timeline. Iím tempted to do a recce version for the next GB and see what improvements I can make. Iíll rebuild the 3D model to incorporate some lessons learned and more detail. With the current surface roughness Iím getting, panel lines are out but Iíll see what can be done.

Great first attempt. :thumbsup: :thumbsup: :thumbsup:. Looking forward to seeing what you can cook up in the future.

Definitions are only going to get higher and results smoother.
This is the future.  In a few years we'll wonder how we ever did without 3d printers.

Good job.
 :thumbsup:

I recently bought a large figure and there are no visible lines on it. Top quality and as good as anything else.  I've played with it a little and the resin sands weird but is otherwise fine.

There are several miniature designers such as Lord of the Print and Bestarium that grant individual printers licences for a reasonable cost.  They can then sell on Etsy and others. It's a matter of time before other modelling genres catch up.  It should it easier for garage firms selling esoteric items.
I don't think it's nice, you laughin'. You see, my mule don't like people laughin'. He gets the crazy idea you're laughin' at him. Now if you apologize, like I know you're going to, I might convince him that you really didn't mean it.

Offline frank2056

  • Wears a suit and tie when browsing What-If
  • Needs A Life Outside What-If
  • *****
  • Posts: 1425
    • My web page
Re: Gloster CXP-1001 - Done
« Reply #36 on: June 19, 2021, 10:54:27 am »
:wub:

Thanks all. One downside of this is that Iíve finished a model but my stash hasnít got any smallerÖ

Just think of the thousands of models you can keep in a thumb drive stash!

The  CXP-1001 came out great; the camo, decals and canopy framing looks great.

Offline NARSES2

  • Nick was always on his mind - just ask the Pet Shop Boys
  • Global Moderator
  • Needs A Life Outside What-If
  • *****
  • Posts: 46202
Re: Gloster CXP-1001 - Done
« Reply #37 on: June 20, 2021, 05:59:08 am »
:wub:

Thanks all. One downside of this is that Iíve finished a model but my stash hasnít got any smallerÖ

 ;D
Decals my @r$e!

Offline Old Wombat

  • Needs A Life Outside What-If
  • *****
  • Posts: 10498
  • Armour: The Gods of War love it!
Re: Gloster CXP-1001 - Done
« Reply #38 on: June 20, 2021, 06:31:30 am »
:wub:

Thanks all. One downside of this is that Iíve finished a model but my stash hasnít got any smallerÖ

Mine's grown since I started my last build ... By about 4 kits! :blink:

It's almost like they're breeding, I tell ya! :o
Has a life outside of What-If & wishes it would stop interfering!

"The purpose of all War is Peace" - St. Augustine

veritas ad mortus veritas est

Offline TheChronicOne

  • Needs A Life Outside What-If
  • *****
  • Posts: 9934
  • -Sprues McDuck-
Re: Gloster CXP-1001 - Done
« Reply #39 on: June 21, 2021, 01:16:53 pm »
Magnificent!!! Very cool and damn right it was ambitious.  ;D
-Sprues McDuck-