seems a lot of you guys got this one
anyway if you want to build this one, i might want to add that your gonna need lots of putty, as it shows some gaps.
the nosewheel is also a nightmare, the hole in the bottom is to small, so i used a thumbtack to make it a bit bigger, seems to have solved it.
if possible, some extra weight in the nose is also required if your building it with wheels down.
anyway i got an update.
last night i masked of some of the wing surface for the splinter camo, brown paint was applied soon after, after that the tape war removed and the paintjob was a succes.
the morning the 2 halves were joined together and gaps were PSR'd, the styrene strips were cut off just right, and painting the inside of the intakes black seemed the best thing to do. final touches and decals were added this morning and now the complete model is sitting in clamps until the glue and paint are dry. the green splinters on the top grey have been applied with an old hard brush, perfect for splintering
but now i realised that im gonna have to add a few drops of paint thinner to my black paint, after 21 hours of drying, the tires were still wet. but they are in place now.
pics to follow later
