Started by Weaver, January 18, 2019, 10:26:54 PM
Quote from: AS.12 on January 19, 2019, 02:51:28 AM* standard loadout: six Sparrow, two Genie and two tanks
Quote from: kitnut617 on January 19, 2019, 10:19:15 AMI think you can rule out any French buy/build Harold, for the same reason most French deals go down the tubes. They'd want to build it all in France.
Quote from: rickshaw on January 19, 2019, 02:35:06 PMIt wasn't until after the 1960s that, that changed because the numbers weren't large enough to allow licensed production (and the price wasn't right).
Quote from: Weaver on January 19, 2019, 10:58:04 AMTotally different tack: trainers.Canada built the CT-114 Tutor (closely comparable to the Jet Provost) for the basic trainer role, so what if they built on that success and developed an advanced tandem-seat trainer of their own design, to replace the CT-133 (Shooting Star)? What might such an aircraft look like?They'd probably want a wide undercarriage track for use on snow-covered runways.They'd probably also be concerned about snow/spray ingestion into the intakes.They might want two engines, although the fact that the CT-114 had only one means that isn't clear.They'd probably want it to have export potential, which means an armed version.Two layouts occur to me:1. A similar layout to the L-39 Albatros, with a low wing (wide u/c track), shoulder-mounted intakes behind the wing leading edge (snow/spray ingestion), and either a single Orpheus engine, two Vipers or two J-85s, the latter giving compatibility with the CT-114 fleet. This is probably more appropriate to a later-timescale, after the benefits of stepped cockpits had been established.2. Since Canadair built the Sabre under licence, they might go down the same route that both Fuji (with the T-1) and Fiat (with the G-91) did, i.e. take the Sabre's basic aerodynamics and shrink them to fit an Orpheus-powered two-seater. You might imagine this as an independent project or coming from participation in the G-91 project in the name of NATO cooperation. As an independent project, it could have twin J-85s, thus making it very like the G-91Y. This is probably more appropriate to an earlier timescale, since it's hard to give it stepped cockpits.Modelling options:For scheme 1:Single-engine: take an L-39 kit and re-purpose it. Optionally, you could replace the straight wings with swept ones from any number of sources.Twin-engine 1: take an L-39 kit as above, but give it the twin J-85 nozzle fairing from the Matchbox G-91Y, enlarged intakes, and PSR them in.Twin-engine 2: take an Aermaccchi Mb.339 kit, fair over the jet nozzle, replace the wings with swept, intakeless ones, and add two engines in biz-jet style pods on top of the rear fuelage.For scheme 2:Single-engine 1: Take a Fuji T.1 kit and re-purpose it. I'm not 100% sure that the aircraft is big enough for Western pilots though, so maybe check it against other types first?Single-engined 2: Take a G-91R and convert it into a G-91T, either by use of a conversion set (they have been made in the past) or by using a T-33 canopy, which would be a nice throwback to the Canadair Silver Star. Replace the camera nose with a plain one (Doesn't the Airfix G-91 come with a plain nose?)Twin-engined: Take a Matchbox G-91Y and give it an tandem canopy and plain nose as above.
Quote from: joncarrfarrelly on January 19, 2019, 03:17:30 PMSpeyed Phantoms make little sense as RCAF air defense Phantoms would be operating with US forces most of the time, keeping J79s would simplify logistics when operating from US bases.
Page created in 0.024 seconds with 20 queries.