Author Topic: My Sea Flankers: An Adventure into my Imagination and Insanity!  (Read 2055 times)

0 Members and 1 Guest are viewing this topic.

Offline silverwindblade

  • Kitbasher
  • ***
  • Posts: 287
  • Formely Known as Silverfox
    • Gordon's Alive Podcast
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #30 on: December 24, 2018, 11:43:38 am »
This is just magic to watch. I always love your work, and this is as excellent as always.
Amidst the blue skies, a link from past to future. The sheltering wings of the protector...
Gordon's Alive, a Podcast I host. Check us out!

Offline su27rules

  • Scratchbuilds the entire model
  • ****
  • Posts: 724
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #31 on: December 25, 2018, 12:48:32 am »
 :wub: :thumbsup:  Great work so far,I love it!!   :thumbsup: :thumbsup:

Offline sykotik

  • Kitbasher
  • ***
  • Posts: 230
  • If it's too good to be true then it probably is
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #32 on: December 25, 2018, 01:50:32 am »
  :wub: :wub: this is just awesome! I love the new shape your going with - it looks very Shinden like - but better!
I will be watching this one for sure

Offline FAR148

  • Targeted for assassination by JMNs
  • ****
  • Posts: 840
  • Member of Team Awesome
    • Far Resin
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #33 on: December 26, 2018, 12:44:57 pm »
Hope everyone is doing well this Holiday Season. Been making a ton of process on my three girls. Still going to post at the same rate, showing my past progress as I continue to build. But here is a look into the future.




Happy Holidays!  :drink:
Steven
Your Place to get your What-If Aftermarket Resin Goodies!!
https://farresin.com/

Offline Old Wombat

  • Needs A Life Outside What-If
  • *****
  • Posts: 6551
  • Armour: The Gods of War love it!
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #34 on: January 01, 2019, 05:47:52 am »
 :thumbsup: :thumbsup: :mellow: :mellow:
Has a life outside of What-If & wishes it would stop interfering!

"The purpose of all War is Peace" - St. Augustine

veritas ad mortus veritas est

Offline FAR148

  • Targeted for assassination by JMNs
  • ****
  • Posts: 840
  • Member of Team Awesome
    • Far Resin
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #35 on: January 13, 2019, 06:26:21 am »
Thanks guys :thumbsup:
Of my three Sea Flankers, my forward swept wing bad girl is the most complicated. There were a few questions I had to answer before I started. Like, having to figure out how to incorporate the design of the wing into the fuselage of the kit? How are they going to attach to the fuselage?  How to make the wing to fuselage joint strong as well as having proper aliment in all views? Also, I knew I wanted to show her with her flight controls in an unpowered position. That means making her wing with positional flight controls. Not too worried about scribing panel lines or locations of the weapon pylons. Can figure that out once her wings are made.

I knew from the start that the best way for me to answer those questions, would be to work it out in Photoshop. To start, I needed to get image of the upper fuselage into photoshop and have it scaled 1 to 1 to the kit part.  So, I took a photo of the upper fuselage with the nose taped in place. In order to scale image of fuselage to the same size as the kit, I had to scale same part to its known dimension. I know from where I cut her wing off, the width of the upper fuselage was 106 mm from side to side. And the length of the wing where it cut was 144 mm. Back into photoshop, I can now scale those area to the correct dimensions.  I then did a quick print to confirm.



Now I can open the top view of her new wing in photoshop and scale it to fit the kit. After a few rounds of scale, print, rescale, I want happy with the look of this. I decided to move her horizontal stabilizer from the wing to the fuselage.



I can then mirror it to the other side and start to refine the locations of the flight controls. It is also time to start to think about how Iím going to attach her new set of wings to her fuselage. In the image below, the area highlighted in red will be the main strict of the wing. It will go through the fuselage, keying in between the main wheel bays and there are a cluster tabs located behind the main gear bays.



I measured and cut a test wing out of illustration board. With the test wing, it makes it easy to mark and make changes before committing to the final styrene part. Once I was happy with its shape, I can now use the test wing as a template to lay it out on a piece of styrene.



To maximize strength and help align the wing horizontally, I cut and glued a piece of styrene in-between the two main wheel wells. It will also be another gluing surface. The main wing structure was cut out of 2 mm sheet styrene. After some sanding and filing to true up all the cuts, time to get her wings into place.







Whatís great with having a one to one image of her wing is I can print it out again and use it to make all the flight control surfaces.  Which will come later.


Thanks for stopping by,
Steven  :cheers:
Your Place to get your What-If Aftermarket Resin Goodies!!
https://farresin.com/

Offline flappydaffy

  • Kitbasher
  • ***
  • Posts: 169
  • Defends seagulls by banning seagull grey
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #36 on: January 14, 2019, 01:53:11 pm »
tip top job!!! very impressive  :thumbsup:

Offline Dizzyfugu

  • Needs A Life Outside What-If
  • *****
  • Posts: 8793
    • Lots of works in my FlickR gallery
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #37 on: January 14, 2019, 11:53:49 pm »
Cool!  :thumbsup:

Offline kerick

  • Needs A Life Outside What-If
  • *****
  • Posts: 4487
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #38 on: January 15, 2019, 03:02:32 am »
Nice work especially with the photoshop.
There's someone in my head, but it's not me!

Offline FAR148

  • Targeted for assassination by JMNs
  • ****
  • Posts: 840
  • Member of Team Awesome
    • Far Resin
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #39 on: March 20, 2019, 04:18:40 am »
Thanks you all for the support  :thumbsup:
Going to have an update soon. Been busy getting this ready for release.





Thanks for stopping by,
Steven
Your Place to get your What-If Aftermarket Resin Goodies!!
https://farresin.com/

Offline silverwindblade

  • Kitbasher
  • ***
  • Posts: 287
  • Formely Known as Silverfox
    • Gordon's Alive Podcast
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #40 on: March 20, 2019, 08:12:24 am »
That is insanely gorgeous <3
Amidst the blue skies, a link from past to future. The sheltering wings of the protector...
Gordon's Alive, a Podcast I host. Check us out!

Offline flappydaffy

  • Kitbasher
  • ***
  • Posts: 169
  • Defends seagulls by banning seagull grey
Re: My Sea Flankers: An Adventure into my Imagination and Insanity!
« Reply #41 on: March 20, 2019, 01:44:57 pm »
so cool!  :thumbsup: