Author Topic: Nausicaa - Ohm  (Read 3691 times)

0 Members and 1 Guest are viewing this topic.

Offline strobez

  • Full scale Arrow in basement
  • *****
  • Posts: 915
  • "Oh, that shouldn't be too hard to do..."
Re: Nausicaa - Ohm
« Reply #30 on: May 17, 2018, 10:57:38 pm »
Yep. I think you may be right about that.



There are about 5 different shades of green/khaki one the beasti now... I think a coat of Future is in order in case I need any "do overs"with the dry brushing.

Now to start on the other one...
Thanks!

Greg

Offline nighthunter

  • Needs A Life Outside What-If
  • *****
  • Posts: 1472
  • "Maybe I like that I'm Not Alright."
Re: Nausicaa - Ohm
« Reply #31 on: May 18, 2018, 06:51:31 am »
The gray one looks dead already
"Mind that bus." "What bus?" *SPLAT!*

Offline scooter

  • Needs A Life Outside What-If
  • *****
  • Posts: 4912
Re: Nausicaa - Ohm
« Reply #32 on: May 18, 2018, 06:54:24 am »
The F-106- 26 December 1956 to 8 August 1988
Gone But Not Forgotten

Quote
Oh are you from Wales ?? Do you know a fella named Jonah ?? He used to live in whales for a while.
Groucho Marx

My dA page: Scooternjng

Offline strobez

  • Full scale Arrow in basement
  • *****
  • Posts: 915
  • "Oh, that shouldn't be too hard to do..."
Re: Nausicaa - Ohm
« Reply #33 on: May 18, 2018, 04:42:52 pm »
Well, the grey one is supposed to be dead... so... it's working.  I'd always planned on the grey one to be the "derelict" build. I put a coat of Future on the green one last night and will finish it off with some dry brushed details, but it's basically done.  There's still a lot to do to the grey one yet, so stay tuned!
Thanks!

Greg

Offline strobez

  • Full scale Arrow in basement
  • *****
  • Posts: 915
  • "Oh, that shouldn't be too hard to do..."
Re: Nausicaa - Ohm
« Reply #34 on: May 19, 2018, 08:49:57 am »
Speaking of dead...

I think I left the dead ohm out of the freezer too long... I think something's growing on it...




Thanks!

Greg

Offline Mossie

  • Twiglet doctor
  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 13366
  • Don't laugh at his mule
Re: Nausicaa - Ohm
« Reply #35 on: May 19, 2018, 10:15:39 am »
Know nowt about it, but I like these beasties and especially the work that's going in them.  They look like something you'd find under a stone in the garden, but from a quick Google, it'd be a pretty big stone!
I don't think it's nice, you laughin'. You see, my mule don't like people laughin'. He gets the crazy idea you're laughin' at him. Now if you apologize, like I know you're going to, I might convince him that you really didn't mean it.

Offline zenrat

  • Needs A Life Outside What-If
  • *****
  • Posts: 14409
  • What Would Deadpool Do?
Re: Nausicaa - Ohm
« Reply #36 on: May 20, 2018, 05:27:58 am »
Ummmmmmmmmm, I hesitate to ask but have you been watching those adult anime with girls and the tentacles...

 :o
Fred

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

"...the dreamers of the day are dangerous men, for they may act their dreams with open eyes, to make it possible.

Offline strobez

  • Full scale Arrow in basement
  • *****
  • Posts: 915
  • "Oh, that shouldn't be too hard to do..."
Re: Nausicaa - Ohm
« Reply #37 on: May 21, 2018, 01:42:22 am »
LMAO... urm... no.

Took me a while to track it down, but this is the look I'm going for...



I doubt I have the patience required to really pull that off, but I'll give it a go.
Thanks!

Greg

Offline NARSES2

  • Nick was always on his mind - just ask the Pet Shop Boys
  • Global Moderator
  • Needs A Life Outside What-If
  • *****
  • Posts: 36428
Re: Nausicaa - Ohm
« Reply #38 on: May 21, 2018, 06:30:56 am »
Ummmmmmmmmm, I hesitate to ask but have you been watching those adult anime with girls and the tentacles...

 :o

The mind boggles  :o :o
Decals my @r$e!

Offline strobez

  • Full scale Arrow in basement
  • *****
  • Posts: 915
  • "Oh, that shouldn't be too hard to do..."
Re: Nausicaa - Ohm
« Reply #39 on: May 22, 2018, 03:22:31 pm »
ANYway...

Here's another little update video.  Not surprisingly different than the previous ones on the surface, but after applying the things I learned while building my Tintin Rocket Launch Clock, I realized I must have been following zenrat's guide to wiring and spontaneous combustion after all.  I had all the LEDs running off a single pin - an almost sure way of frying the microcontroller in a flaming ball of fury.  So I had to rewire everything into groups of 6 (with two left over) and run if off 6 pins instead... and at a MUCH lower current.

The fact that you can't tell the difference is the victory here.  The lights that were running at 25 miliamps are now running at 5 each with no real loss of brightness.

As as bonus, the whole mess actually fits inside the green Ohm, so I glued the eyes in place.

https://www.youtube.com/watch?v=1GfYF6B4M9I
Thanks!

Greg

Offline zenrat

  • Needs A Life Outside What-If
  • *****
  • Posts: 14409
  • What Would Deadpool Do?
Re: Nausicaa - Ohm
« Reply #40 on: May 23, 2018, 04:11:43 am »
Bravo.   :thumbsup:

Fred

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

"...the dreamers of the day are dangerous men, for they may act their dreams with open eyes, to make it possible.

Offline strobez

  • Full scale Arrow in basement
  • *****
  • Posts: 915
  • "Oh, that shouldn't be too hard to do..."
Re: Nausicaa - Ohm
« Reply #41 on: May 27, 2018, 06:17:02 pm »
Time for another update.  So now that the eyes were more or less sorted out, I fixed up the other major electrical component of this build, the... uhm... tentacles...  :-X

Hehe, actually for those who've seen the film, you will recognize these (hopefully) as the Ohmu's yellow feelers.  I started out by glueing some fibre optic strands scavenged from a cheapo dollar store "mood lamp" to a couple of white LEDs using a bit of clear tubing as a connector.  I then created a capacitive touch sensor using a giant ball of alluminium foil and stuffing it inside the grey Ohm.  That way when I touch the grey Ohmu, the lights on the green Ohmu's feelers should light up.

The sensitivity needs some adjustment, but it seems to have worked: https://www.youtube.com/watch?v=Wh6tLsdfmJo

Once that was done, I installed the eyes properly and then drilled a bunch of tiny holes and fed the fibres through the mouth piece.  Sounded so simple, but what a nightmare.  That mess of spaghetti did not want to cooperate and the fibres are quite brittle, so I ended up snapping a bunch of them off (or just bending them enough to render the internal transmitting structure effectively dead).  It took me three tries - first I glued them in place and tried to feed them through the back of the mouthpiece.  When that didn't really work, I pulled it all apart and then redid it by trying to feed them in from the front and then glue them to the lights...  That ended up being worse because the fibres kept falling out and I couldn't get them lined up to glue.  So it was back to the first method with a little more patience.

In the end, it didn't quite work as I envisioned.  I only got about half of the fibres I'd been hoping for (partly from more snapping off and partly because I simply couldn't drill enough holes).  After I got them in place and painted with a clear yellow Tamiya acrylic the effect was so subtle I wondered why I'd bothered.  Oh well, it's there... best viewed in the pitch dark.  :banghead:





Of course, now that I think about it... most of my models are probably best viewed in pitch dark. :)
Thanks!

Greg

Offline Rick Lowe

  • Needs A Life Outside What-If
  • *****
  • Posts: 1717
Re: Nausicaa - Ohm
« Reply #42 on: January 01, 2019, 01:52:31 am »
So, how's this one coming along, Greg?

Inquiring (ok, nosy!) minds want to know...