Author Topic: Freightdog at Telford 2017  (Read 3718 times)

0 Members and 1 Guest are viewing this topic.

Offline Thorvic

  • Evil Kit Finder Git General
  • Administrator
  • Needs A Life Outside What-If
  • *****
  • Posts: 11265
    • Album
Re: Freightdog at Telford 2017
« Reply #30 on: November 02, 2017, 01:07:00 am »
Colin, do you have any plans on re-releasing the 2-cannon pod that the P.1154 had ?

Probably not until kit comes out again.

Colin

Yes Please, although now we might have to see what medium it might be released in ?  :o
Project Cancelled SIG Secretary, specialising in post war British RN warships, RN and RAF aircraft projects. Also USN and Russian warships

Offline Freightdog862

  • Moderator
  • Scratchbuilds the entire model
  • *****
  • Posts: 613
    • http://www.freightdogmodels.co.uk
Re: Freightdog at Telford 2017
« Reply #31 on: November 06, 2017, 03:04:17 pm »
Colin, do you have any plans on re-releasing the 2-cannon pod that the P.1154 had ?

Probably not until kit comes out again.

Colin

Yes Please, although now we might have to see what medium it might be released in ?  :o

Your guess is as good as mine!

Colin

Offline Freightdog862

  • Moderator
  • Scratchbuilds the entire model
  • *****
  • Posts: 613
    • http://www.freightdogmodels.co.uk
Re: Freightdog at Telford 2017
« Reply #32 on: November 06, 2017, 03:05:31 pm »
Still plugging away at getting stuff ready, I have all the new stuff but I've decided to keep some of it as a surprise, so pop by the stand on Saturday morning and take a look!

Colin

Offline The Wooksta!

  • Resident Soup Dragon
  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 6209
  • Would you risk it for a chocolate biscuit?
Re: Freightdog at Telford 2017
« Reply #33 on: November 06, 2017, 04:15:19 pm »
Have you got any of the decals you released with your reboxes of the AZ Spitfire 14/18 still in stock?  Wouldn't say no to a pair of each.
"It's basically a cure... for not being an axe-wielding homicidal maniac... the potential market's enormous!"

"Now then, Butch Harry. Tell us about Fulham."

The Plan - a Blog
www.whatifmodelers.com/index.php/topic,34762.0.html

Offline Freightdog862

  • Moderator
  • Scratchbuilds the entire model
  • *****
  • Posts: 613
    • http://www.freightdogmodels.co.uk
Re: Freightdog at Telford 2017
« Reply #34 on: November 08, 2017, 10:26:00 am »
Have you got any of the decals you released with your reboxes of the AZ Spitfire 14/18 still in stock?  Wouldn't say no to a pair of each.

Yes I'll bring along, I normally sell them for 3.50, is a tenner for the 4 sheets OK?

Colin
   
 

Offline chrisonord

  • DIDN'T READ THE QUESTION PROPERLY
  • Needs A Life Outside What-If
  • *****
  • Posts: 3482
  • Paint it gloss??......HOW DARE YOU!!!
Re: Freightdog at Telford 2017
« Reply #35 on: November 08, 2017, 10:34:41 am »
Hya Colin,
 I am happy to wait till the dust has settled after Telford, to see what mirage stuff you are getting. I am unable to go to the Telford show unfortunately  :-\
Chris.   
The dogs philosophy on life.
If you cant eat it hump it or fight it,
Pee on it and walk away!!

Offline The Wooksta!

  • Resident Soup Dragon
  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 6209
  • Would you risk it for a chocolate biscuit?
Re: Freightdog at Telford 2017
« Reply #36 on: November 08, 2017, 12:37:30 pm »
Have you got any of the decals you released with your reboxes of the AZ Spitfire 14/18 still in stock?  Wouldn't say no to a pair of each.

Yes I'll bring along, I normally sell them for 3.50, is a tenner for the 4 sheets OK?

Colin

That's just champion!  Thanks!
"It's basically a cure... for not being an axe-wielding homicidal maniac... the potential market's enormous!"

"Now then, Butch Harry. Tell us about Fulham."

The Plan - a Blog
www.whatifmodelers.com/index.php/topic,34762.0.html

Offline Freightdog862

  • Moderator
  • Scratchbuilds the entire model
  • *****
  • Posts: 613
    • http://www.freightdogmodels.co.uk
Re: Freightdog at Telford 2017
« Reply #37 on: November 14, 2017, 03:59:47 am »
Great to see you all at Telford. For those in the UK who didn't get a chance to buy an SR.53, I have a few on my website now, it will be a couple of weeks before any other UK outlets get them in stock, and ones sold from my website will include a free set of decals left over from my resin kit which are a bit better printed than the AZ ones. Stocks are limited though, my own boxing will only come out next year.

Colin     

Offline PR19_Kit

  • Closeted Take That fan
  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 27540
  • Whiffing since the 70s
Re: Freightdog at Telford 2017
« Reply #38 on: November 14, 2017, 04:05:42 am »
Ordered.  :thumbsup: ;D
Any aircraft can be improved by fitting longer wings

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

Offline Freightdog862

  • Moderator
  • Scratchbuilds the entire model
  • *****
  • Posts: 613
    • http://www.freightdogmodels.co.uk
Re: Freightdog at Telford 2017
« Reply #39 on: November 14, 2017, 04:10:09 am »
Ordered.  :thumbsup: ;D

Very speedy ordering Kit! Thank you.

Colin






Offline kitbasher

  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 3853
  • bashes kits
Re: Freightdog at Telford 2017
« Reply #40 on: November 18, 2017, 04:26:20 am »
Great to see you all at Telford. For those in the UK who didn't get a chance to buy an SR.53, I have a few on my website now, it will be a couple of weeks before any other UK outlets get them in stock, and ones sold from my website will include a free set of decals left over from my resin kit which are a bit better printed than the AZ ones. Stocks are limited though, my own boxing will only come out next year.

Colin     

Ordered!
IPMS What If? & Secret Project SIG member.
On the go: Arrow, Beaumaris, Battle, Bronco GA.1, CASA 2.217, Corsair GR.1, EE P12, Hawker P1067, Hellcat IV, Ice Cream Tank, JP T4, Jumo MiG-15, Macchi MC.205, Meteor F.8R, Phantom FG1, SAAB J-29, Sea Hawk T7, Spitfire XII, Ta154, Val, Wellington.

Offline Freightdog862

  • Moderator
  • Scratchbuilds the entire model
  • *****
  • Posts: 613
    • http://www.freightdogmodels.co.uk
Re: Freightdog at Telford 2017
« Reply #41 on: November 22, 2017, 01:47:55 pm »
After a easy start to the month allowing me to prepare for Telford, the day job is punishing me with extra shifts so only just getting a chance to catch up on packing orders. I've also listed the VC10 multi role sets on my website, I'm selling them with the 26decal RAF VC10 decal sheets as a bundle, if anyone just wants the conversion let me know and I can sort out. 

Thanks.

Colin   

Offline kitbasher

  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 3853
  • bashes kits
Re: Freightdog at Telford 2017
« Reply #42 on: November 24, 2017, 05:59:57 am »
Great to see you all at Telford. For those in the UK who didn't get a chance to buy an SR.53, I have a few on my website now, it will be a couple of weeks before any other UK outlets get them in stock, and ones sold from my website will include a free set of decals left over from my resin kit which are a bit better printed than the AZ ones. Stocks are limited though, my own boxing will only come out next year.

Colin     

Ordered!

....and received.  Thanks Colin.
IPMS What If? & Secret Project SIG member.
On the go: Arrow, Beaumaris, Battle, Bronco GA.1, CASA 2.217, Corsair GR.1, EE P12, Hawker P1067, Hellcat IV, Ice Cream Tank, JP T4, Jumo MiG-15, Macchi MC.205, Meteor F.8R, Phantom FG1, SAAB J-29, Sea Hawk T7, Spitfire XII, Ta154, Val, Wellington.

Offline McColm

  • Needs A Life Outside What-If
  • *****
  • Posts: 7088
Re: Freightdog at Telford 2017
« Reply #43 on: November 24, 2017, 10:36:04 am »
After a easy start to the month allowing me to prepare for Telford, the day job is punishing me with extra shifts so only just getting a chance to catch up on packing orders. I've also listed the VC10 multi role sets on my website, I'm selling them with the 26decal RAF VC10 decal sheets as a bundle, if anyone just wants the conversion let me know and I can sort out. 

Thanks.

Colin
It's a pity that they aren't in 1/72 scale, as I could have used them on my vacform kit!
« Last Edit: November 24, 2017, 10:42:56 am by McColm »