Author Topic: SAM Publications Resin Conversion Sets  (Read 3217 times)

0 Members and 1 Guest are viewing this topic.

Offline McColm

  • Needs A Life Outside What-If
  • *****
  • Posts: 6467
SAM Publications Resin Conversion Sets
« on: July 07, 2014, 12:20:06 pm »
Hello,
I've noticed that you have bought some of the SAM Publications resin conversion sets especially for the 1/72 TSR 2.
Are you planning on issuing the extended nosewheel leg with extended scissors link?

Steven

Offline Gondor

  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 6076
  • Builds Slower Than A Glacier Moves
Re: SAM Publications Resin Conversion Sets
« Reply #1 on: July 08, 2014, 11:06:16 am »
Hello,
I've noticed that you have bought some of the SAM Publications resin conversion sets especially for the 1/72 TSR 2.
Are you planning on issuing the extended nosewheel leg with extended scissors link?

Steven

Extended TSR2 nose-wheel legs! where?

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Offline kitnut617

  • That's got his tum rumbling already just by the sound of it.
  • Needs A Life Outside What-If
  • *****
  • Posts: 9461
Re: SAM Publications Resin Conversion Sets
« Reply #2 on: July 08, 2014, 11:39:01 am »
Well, at one time, SAM Publications produced them -----   ;)

If I'm not building models, I'm out riding my dirtbike

Offline McColm

  • Needs A Life Outside What-If
  • *****
  • Posts: 6467
Re: SAM Publications Resin Conversion Sets
« Reply #3 on: July 08, 2014, 12:40:35 pm »
Thats the one. I don't know if they still sell them, that's why I asked Freightdog.
Unless someone else sells them?
And if enough Whiffers ask, they might take notice.

Offline Gondor

  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 6076
  • Builds Slower Than A Glacier Moves
Re: SAM Publications Resin Conversion Sets
« Reply #4 on: July 08, 2014, 01:22:39 pm »
Thats the one. I don't know if they still sell them, that's why I asked Freightdog.
Unless someone else sells them?
And if enough Whiffers ask, they might take notice.

Says limited edition on the packet so its unlikely that its available now. nor do I think that anyone else does/did the extended nose gear which is a pity as it saves a lot of work to build it yourself.

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Offline Thorvic

  • Evil Kit Finder Git General
  • Administrator
  • Needs A Life Outside What-If
  • *****
  • Posts: 10970
    • Album
Re: SAM Publications Resin Conversion Sets
« Reply #5 on: July 08, 2014, 03:39:01 pm »
Erm these are parts mastered and owned by Paul Lucas, if there is enough interest, Colin may ask Paul to do another run.
Project Cancelled SIG Secretary, specialising in post war British RN warships, RN and RAF aircraft projects. Also USN and Russian warships

Offline Gondor

  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 6076
  • Builds Slower Than A Glacier Moves
Re: SAM Publications Resin Conversion Sets
« Reply #6 on: July 09, 2014, 11:10:27 am »
Erm these are parts mastered and owned by Paul Lucas, if there is enough interest, Colin may ask Paul to do another run.

In that case put me down for a set, probably two to show intrest  :thumbsup:

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Offline McColm

  • Needs A Life Outside What-If
  • *****
  • Posts: 6467
Re: SAM Publications Resin Conversion Sets
« Reply #7 on: July 09, 2014, 05:08:37 pm »
Put me down for two sets as well.

Offline darthspud

  • Makes own decals
  • ***
  • Posts: 457
Re: SAM Publications Resin Conversion Sets
« Reply #8 on: July 10, 2014, 12:31:33 am »
two for me too please. Avon show ?
or is that just a tad presumptious.? :thumbsup:
 :bow:
too old for a paper round, too young for me pensions, dammit, back to work then!

Offline Steel Penguin

  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 2244
Re: SAM Publications Resin Conversion Sets
« Reply #9 on: July 10, 2014, 06:43:30 am »
and me  :thumbsup: 1 or 2 as well ( depending on inflation)
Redone 19/08/15  the things you learn, give your mind the wings to fly, and the chains to hold yourself steady

Offline Freightdog862

  • Moderator
  • Makes own decals
  • *****
  • Posts: 597
    • http://www.freightdogmodels.co.uk
Re: SAM Publications Resin Conversion Sets
« Reply #10 on: July 17, 2014, 01:02:07 pm »
Hi chaps,

Sorry for late reply, have not been on the site for a bit. I was talking to Paul about a month ago on re-issuing the extended leg, possibly in white metal. Also hope to have a new TSR2 and other period might have been set out for SMW, won't say anymore as projects have a habit of slipping these days!

Now you have reminded me I'll get onto Paul about it again.

Colin


 

Offline Gondor

  • What-IF SIG
  • Needs A Life Outside What-If
  • *****
  • Posts: 6076
  • Builds Slower Than A Glacier Moves
Re: SAM Publications Resin Conversion Sets
« Reply #11 on: July 17, 2014, 01:52:15 pm »
Sounds great Colin.

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Offline darthspud

  • Makes own decals
  • ***
  • Posts: 457
Re: SAM Publications Resin Conversion Sets
« Reply #12 on: July 18, 2014, 09:54:01 am »
 :thumbsup: nice one Cyril  :thumbsup:
too old for a paper round, too young for me pensions, dammit, back to work then!

Offline McColm

  • Needs A Life Outside What-If
  • *****
  • Posts: 6467
Re: SAM Publications Resin Conversion Sets
« Reply #13 on: July 25, 2014, 07:40:53 pm »
Thanks Colin.

Offline McColm

  • Needs A Life Outside What-If
  • *****
  • Posts: 6467
Re: SAM Publications Resin Conversion Sets
« Reply #14 on: December 09, 2014, 05:36:08 pm »
They did it, the extended nosewheel for the TSR.2 in 1/72 is in their catalog and on sale :cheers: